 |
LSYA-S104 single swing square tube bed without wheels
1. Parameters of single shaking hospital bed
Product dimensions: length: 2050mm, width: 960mm, height: 500mm.
The back inclination angle is 0～75°, which can be adjusted arbitrarily
2. Product material: The bed body is made of high-quality cold-rolled carbon steel pipe 80×40×1.0mm, and the bed legs are made of high-quality cold-rolled carbon steel pipe 40×40×1.0mm. The bed panel is welded and formed by high-quality 20×40×1.0mm cold-rolled carbon steel pipe, which improves the strength of the bed panel, with balanced force and strong pressure resistance; the welded steel pipe below is reinforced, which is solid and durable.
3. The bed body statically can carry 240Kg; the back bed surface adopts a double support structure, and the double support is formed by cold steel plate stamping, which strengthens the bearing capacity of the back plate, and the rocker bears less pressure, and the operation is labor-saving when shaking.
4. A set of rocker; stainless steel handle, hidden design, make the operation clear at a glance. The rocker is all stainless steel design, firm and flexible, no noise, easy to operate; the patient's back can be flexibly adjusted. It adopts the in-position limit protection device and coats the ABS plastic dust jacket, which is beautiful in appearance, wear-resistant and has a long service life.
5. The total length of the side guardrail is 1200mm, the D-type aluminum alloy handrail, surface hardening treatment, five stainless steel pillars, the upper and lower connecting parts are made of one-time stamping and forming steel parts, the thickness is 3.0mm, the switch is carefully designed to ensure the safety of long-term use, and it is equipped with anti-tightening Firmware, wear-resistant, non-deformable, can shrink and lay flat, slightly higher than the bed surface when shrinking, which can prevent the mattress from shifting.
6. The streamlined European version of the headboard and tailboard is made of ABS reinforced plastic material. It is formed at one time, without gaps, easy to clean, and does not deform. It has a hidden lock switch, which is stable and reliable. Anti-collision function; symmetrical quick hook seat, which can be quickly disassembled.
7. The whole bed is treated with double phosphating + electrostatic powder coating. The bed coating adopts antibacterial coating, which is antibacterial and antibacterial, anti-acid and alkali corrosion, anti-stain, and effectively prolongs the service life.
8. Mattress size: can match the size of the bed. The mattress is made of 4 cm of brown silk and 2 cm of high-density sponge. The fabric is made of a layer of waterproof cloth, which has good elasticity and toughness and is not easy to deform. The mattress cover is fully detachable and easy to remove and wash.
bedside table parameters
1. Size of bedside table: 480*480*760mm.
2. The overall use of ABS material injection molding, high material strength, beautiful appearance;
3. The bedside table is composed of a cabinet body, a cover, a cabinet door, a drawer, a pull board, a towel rack, etc.;
4. The shape of the front of the cabinet is arc-shaped, and the left and right sides are equipped with foldable hidden towel racks, which will be extended when needed, otherwise folded when not in use, and placed in the side body of the cabinet, with an angle range of 90 degrees;
5. The outer shape of the drawer panel is arc-shaped, and there is a drawer handle hole under the panel, which is convenient for pulling and closing the drawer;
6. There is a layer of clapboard in the cabinet door, which is convenient for storing items. The height of the clapboard can also be adjusted according to the height of the items, with a two-layer adjustment function.
IV pole
1. Infusion rod tube specifications: outer tube 25cm wall thickness 0.5mm
Inner tube 19cm wall thickness 0.8 mm
1. Infusion rod material: stainless steel
2. Infusion stand base material: cast iron double-sided paint will never rust
3. Infusion stand height: 200cm
5. Telescopic range of infusion stand: 110- -200cm
6. Four hook design
1. Parameters of square tube surface single shaking hospital bed
1. Product dimensions: length: 2050mm, width: 960mm, height: 500mm.
The back inclination angle is 0～75°, which can be adjusted arbitrarily
2. Product material: The bed body is made of high-quality cold-rolled carbon steel pipe 80×40×1.2mm, and the bed legs are made of high-quality cold-rolled carbon steel pipe 40×40×1.2mm. The bed panel is welded with high-quality cold-rolled carbon steel pipe of 20×40×1.2mm thickness to improve the strength of the bed panel, with balanced force and strong pressure resistance; the welded steel pipe below is reinforced, which is firm and durable.
3. The bed body statically can carry 240Kg; the back bed surface adopts a double support structure, and the double support is formed by cold steel plate stamping, which strengthens the bearing capacity of the back plate, and the rocker bears less pressure, and the operation is labor-saving when shaking.
4. A set of rocker; stainless steel handle, hidden design, make the operation clear at a glance. The rocker is all stainless steel design, firm and flexible, no noise, easy to operate; the patient's back can be flexibly adjusted. It adopts the in-position limit protection device and coats the ABS plastic dust jacket, which is beautiful in appearance, wear-resistant and has a long service life.
5. The total length of the side guardrail is 1200mm, the D-type aluminum alloy handrail, surface hardening treatment, five stainless steel pillars, the upper and lower connecting parts are made of one-time stamping and forming steel parts, the thickness is 3.0mm, the switch is carefully designed to ensure the safety of long-term use, and it is equipped with anti-tightening Firmware, wear-resistant, non-deformable, can shrink and lay flat, slightly higher than the bed surface when shrinking, which can prevent the mattress from shifting.
6. Adopt 5-inch high-grade casters with built-in fully enclosed self-lubricating bearings, no need for oil care, prevent foreign objects from being involved, and independently brake; the wheel surface is made of TPR polymer wear-resistant material, which is wear-resistant and noise-free.
7. The streamlined European version of the bed head and tail board is made of ABS reinforced plastic material, which is formed in one time, without gaps, easy to clean, no deformation, hidden locking switch, stable and reliable. Anti-collision function; symmetrical quick hook seat, which can be quickly disassembled.
8. The whole bed is treated with double phosphating + electrostatic powder coating. The bed coating adopts antibacterial coating, which is antibacterial and antibacterial, anti-acid and alkali corrosion, anti-stain, and effectively prolongs the service life.
9. Mattress size: can match the size of the bed. The mattress is made of 4 cm of brown silk and 2 cm of high-density sponge. The fabric is made of a layer of waterproof cloth, which has good elasticity and toughness and is not easy to deform. The mattress cover is fully detachable and easy to remove and wash.
1. Parameters of single shaking hospital bed
Product dimensions: length: 2050mm, width: 960mm, height: 500mm.
The back inclination angle is 0～75°, which can be adjusted arbitrarily
2. Product material: The bed body is made of high-quality cold-rolled carbon steel pipe 80×40×1.0mm, and the bed legs are made of high-quality cold-rolled carbon steel pipe 40×40×1.0mm. The bed panel is welded and formed by high-quality 20×40×1.0mm cold-rolled carbon steel pipe, which improves the strength of the bed panel, with balanced force and strong pressure resistance; the welded steel pipe below is reinforced, which is solid and durable.
3. The bed body statically can carry 240Kg; the back bed surface adopts a double support structure, and the double support is formed by cold steel plate stamping, which strengthens the bearing capacity of the back plate, and the rocker bears less pressure, and the operation is labor-saving when shaking.
4. A set of rocker; stainless steel handle, hidden design, make the operation clear at a glance. The rocker is all stainless steel design, firm and flexible, no noise, easy to operate; the patient's back can be flexibly adjusted. It adopts the in-position limit protection device and coats the ABS plastic dust jacket, which is beautiful in appearance, wear-resistant and has a long service life.
5. The total length of the side guardrail is 1200mm, the D-type aluminum alloy handrail, surface hardening treatment, five stainless steel pillars, the upper and lower connecting parts are made of one-time stamping and forming steel parts, the thickness is 3.0mm, the switch is carefully designed to ensure the safety of long-term use, and it is equipped with anti-tightening Firmware, wear-resistant, non-deformable, can shrink and lay flat, slightly higher than the bed surface when shrinking, which can prevent the mattress from shifting.
6. The streamlined European version of the headboard and tailboard is made of ABS reinforced plastic material. It is formed at one time, without gaps, easy to clean, and does not deform. It has a hidden lock switch, which is stable and reliable. Anti-collision function; symmetrical quick hook seat, which can be quickly disassembled.
7. The whole bed is treated with double phosphating + electrostatic powder coating. The bed coating adopts antibacterial coating, which is antibacterial and antibacterial, anti-acid and alkali corrosion, anti-stain, and effectively prolongs the service life.
8. Mattress size: can match the size of the bed. The mattress is made of 4 cm of brown silk and 2 cm of high-density sponge. The fabric is made of a layer of waterproof cloth, which has good elasticity and toughness and is not easy to deform. The mattress cover is fully detachable and easy to remove and wash.
bedside table parameters
1. Size of bedside table: 480*480*760mm.
2. The overall use of ABS material injection molding, high material strength, beautiful appearance;
3. The bedside table is composed of a cabinet body, a cover, a cabinet door, a drawer, a pull board, a towel rack, etc.;
4. The shape of the front of the cabinet is arc-shaped, and the left and right sides are equipped with foldable hidden towel racks, which will be extended when needed, otherwise folded when not in use, and placed in the side body of the cabinet, with an angle range of 90 degrees;
5. The outer shape of the drawer panel is arc-shaped, and there is a drawer handle hole under the panel, which is convenient for pulling and closing the drawer;
6. There is a layer of clapboard in the cabinet door, which is convenient for storing items. The height of the clapboard can also be adjusted according to the height of the items, with a two-layer adjustment function.
IV pole
1. Infusion rod tube specifications: outer tube 25cm wall thickness 0.5mm
Inner tube 19cm wall thickness 0.8 mm
1. Infusion rod material: stainless steel
2. Infusion stand base material: cast iron double-sided paint will never rust
3. Infusion stand height: 200cm
5. Telescopic range of infusion stand: 110- -200cm
6. Four hook design
1. Parameters of square tube surface single shaking hospital bed
1. Product dimensions: length: 2050mm, width: 960mm, height: 500mm.
The back inclination angle is 0～75°, which can be adjusted arbitrarily
2. Product material: The bed body is made of high-quality cold-rolled carbon steel pipe 80×40×1.2mm, and the bed legs are made of high-quality cold-rolled carbon steel pipe 40×40×1.2mm. The bed panel is welded with high-quality cold-rolled carbon steel pipe of 20×40×1.2mm thickness to improve the strength of the bed panel, with balanced force and strong pressure resistance; the welded steel pipe below is reinforced, which is firm and durable.
3. The bed body statically can carry 240Kg; the back bed surface adopts a double support structure, and the double support is formed by cold steel plate stamping, which strengthens the bearing capacity of the back plate, and the rocker bears less pressure, and the operation is labor-saving when shaking.
4. A set of rocker; stainless steel handle, hidden design, make the operation clear at a glance. The rocker is all stainless steel design, firm and flexible, no noise, easy to operate; the patient's back can be flexibly adjusted. It adopts the in-position limit protection device and coats the ABS plastic dust jacket, which is beautiful in appearance, wear-resistant and has a long service life.
5. The total length of the side guardrail is 1200mm, the D-type aluminum alloy handrail, surface hardening treatment, five stainless steel pillars, the upper and lower connecting parts are made of one-time stamping and forming steel parts, the thickness is 3.0mm, the switch is carefully designed to ensure the safety of long-term use, and it is equipped with anti-tightening Firmware, wear-resistant, non-deformable, can shrink and lay flat, slightly higher than the bed surface when shrinking, which can prevent the mattress from shifting.
6. Adopt 5-inch high-grade casters with built-in fully enclosed self-lubricating bearings, no need for oil care, prevent foreign objects from being involved, and independently brake; the wheel surface is made of TPR polymer wear-resistant material, which is wear-resistant and noise-free.
7. The streamlined European version of the bed head and tail board is made of ABS reinforced plastic material, which is formed in one time, without gaps, easy to clean, no deformation, hidden locking switch, stable and reliable. Anti-collision function; symmetrical quick hook seat, which can be quickly disassembled.
8. The whole bed is treated with double phosphating + electrostatic powder coating. The bed coating adopts antibacterial coating, which is antibacterial and antibacterial, anti-acid and alkali corrosion, anti-stain, and effectively prolongs the service life.
9. Mattress size: can match the size of the bed. The mattress is made of 4 cm of brown silk and 2 cm of high-density sponge. The fabric is made of a layer of waterproof cloth, which has good elasticity and toughness and is not easy to deform. The mattress cover is fully detachable and easy to remove and wash.
